|
|
|
|
 |
|
" FLUKE" : Fluke ScopeMeter 190 Series Specifications
|
|
 |
새 페이지 1
|
"
FLUKE"
: Fluke ScopeMeter
190
Series
Specifications
|
|
|
|
|
 |
ScopeMeter
190
Series
Specifications |
| Oscilloscope
Mode |
| Vertical
Deflection |
Bandwidth:
- Fluke 199= 200 MHz
- Fluke 196= 100 MHz
- Fluke 192= 60 MHz
Rise time:
- Fluke 199= 1.7 ns
- Fluke 196= 3.5 ns
- Fluke 192= 5.8 ns
Bandwidth limiter: User
selectable 10 kHz or 20 MHz
Number of inputs: 2 plus external trigger. All isolated
from each other and ground.
Input coupling: AC, DC with ground level indicator
Input sensitivity: 5 mV/div to100 V/div
Input voltage: See general specifications for maximum
rating
Vertical resolution: 8 bit
Accuracy: ?1.5% of reading + 0.04 x range/div)
Input impedance: 1 MW ?1% // 15 pF ?2 pF
|
| Horizontal |
Maximum
real-time sample rate:
- Fluke 199=
2.5
GS/s
- Fluke 196=
1
GS/s
- Fluke 192=
500
MS/s
Number of digitizers: 2
Time base range:
- Fluke 199 and 196= 5 ns/div to
5 s/div
- Fluke 192= 10 ns/div to 5
s/div
Maximum record length: 1,000
points per input
27,500 points per input in ScopeRecord?roll mode
(10 ms/div ... 2 min/div)
Accuracy: ?(0.01% of reading + 1 pixel)
Glitch capture: 50 nsec (5 ?ec/div
to 1 min/div) Faster time bases have higher sample rates than
20 MS/s
|
| Display
and acquisition |
Display
modes: Input A, input B, dual, average, persistence,
invert, replay
Acquisition modes: Normal, auto, single shot,
ScopeRecord? roll, glitch capture |
| Trigger
and delay |
Source:
Input A, input B, external trigger input. All input references
isolated from each other and ground.
Modes: Automatic Connect-and-View? free run, single
shot, edge, delay, video, video line, selectable pulse width
Connect-and-View? Advanced
automatic triggering that recognizes signal patterns,
automatically sets up and continuously adjusts triggering,
time base and amplitude. Automatically displays stable
waveforms of complex and dynamic signals like motor drive and
control signals.
Video triggering: NTSC, PAL, PAL+, SECAM. Includes
field 1 and 2 and line select.
Pulse width triggering: Pulse width qualified by time.
Allows for triggering t, = t, ?/font> t, where t is
selectable in minimal steps of 0.01 div or 50 nsec.
Time delay: 9 divisions pre-trigger view to 1,000
divisions trigger delay
|
| Automatic
capture of 100 screens |
The
instrument ALWAYS memorizes last 100 screens (no user
interaction or setup required). When an anomaly occurs on
screen, there’s
10 seconds to press HOLD and review it. If one sets up the
instrument for triggering on glitches or intermittent
anomalies the unit operates in “baby-sit?mode
and will capture 100 events.
Replay: Manual or continuous replay. Displays the
captured 100 screens as a “live?animation.
The contents can also be viewed by manually scrolling
backwards and forwards “screen
by screen?
Replay storage: Up to 2 sets of 100 screens can be
saved for later recall and analysis. |
| Automatic
scope measurements |
VDC,
VAC rms, VAC+DC, Vpeak max, Vpeak min, Vpeak to peak,
frequency (Hz), positive pulse width, negative pulse width,
positive duty cycle, negative duty cycle, amp AC, amp DC, amp
AC+DC, power factor, watts, VA, VA reactive, phase,
temperature ?,
temperature ?,
dBV, dBm into 50W and 600W |
| Cursor
Measurements |
Source:
Input A or B
Dual horizontal lines: Voltage at cursor 1 and 2,
voltage between cursors
Dual vertical lines: Time between cursors, voltage
between markers
Single vertical line: Min-Max and Average voltage at
cursor position |
| Zoom |
Up
to 8x horizontal zoom |
| Meter
Mode |
| General |
Via
4 mm banana inputs. Fully isolated from scope inputs and scope
ground. The specified accuracy is valid over the temperature
range 18 ? to
28 ? (15
? to
33 ?).
Add 10 % of specified accuracy for each degree ?
below 18 ?
or above 28
? (15
? to
33 ?). |
| Maximum
resolution |
5,000
counts |
| Voltmeter
ranges |
500mV,
5V, 50V, 500V, 1,000V |
| Accuracy |
VDC:
?(0.5 % + 5 counts)
VAC true rms
15 Hz to 60 Hz: ?(1 % + 10 counts)
60 Hz to 1 kHz: ?(2.5 % + 15 counts)
VAC+DC true rms
DC to 60 Hz: ?(1 % + 10 counts)
60 Hz to 1 kHz: ?(2.5 % + 15 counts) |
| Ohms |
Ranges:
500W, 5kW, 50kW, 500kW, 5MW, 30MW
Accuracy: ?(0.6 % + 5 counts) |
| Other
meter functions |
Continuity:
Beeper on W (?10W)
Diode test: Up to 2.8V
Amps: Amp DC, Amp AC, Amp AC+DC using an
optional current clamp or shunt. Scaling factors:
0.1 mV/Amp to 100 V/Amp
Temperature (?,
?):
With optional accessories.
Scale factors 1 mV/? or
1 mV/?
Input
impedance: 1 MW ?1% // 10 pF ?2 pF
Advanced meter functions: Auto/manual ranging, relative
measurements (Zero reference), TrendPlot recording |
| Recorder
Mode |
| ScopeRecord-roll
mode |
Dual
input waveform storage mode.
Source and display: Input A,
Input B, Dual
Memory depth: 27,500 points per
input. Each point consist of Min-Max pair.
Min-Max values: Min-Max values are measured at high
sample rate ensuring capture and display of glitches
Sample Recording Settings:
Set Time base range = 10 ms/div to 1 min/div:
- Recorded timespan: 11 sec to
15 hrs
- Glitch capture: 50 nsec
- Sample rate: 20 MS/s
- Resolution: 400 ?ec
to 2 sec
Set Time base range = 2 min/div:
- Recorded timespan: 30 hrs
- Glitch capture: 250 nsec
- Sample rate: 4 MS/s
- Resolution: 4 sec
Recording modes: Single sweep,
continuous roll, start on external trigger
Horizontal scale: Time from start, time of day
Zoom: Up to 100 x zoom
Memory: Up to 2 dual input ScopeRecordings can be saved
for later recall and analysis
|
| TrendPlot?Recording |
Dual
input electronic paperless chart recorder. Plots, displays and
stores meter and scope measurements.
Source and display: Input A, Input B and DMM input
Memory depth: 13,500 points
record per input. Per record point a minimum, maximum and
average value, and a time and date stamp are stored.
Ranges: 10 s/div to 20 min/div in
normal view mode. 10 min/div to 24 hour/div in view-all mode
(overview of total record)
Recorded timespan: Up to 8 days with a resolution of 1
minute
Recording mode: Continuous roll
Measurement speed: 2.5 measurements per second maximum
Horizontal scale: Time from start, time of day
Zoom: Up to 64x zoom
Memory: Up to 2 TrendPlot recordings can be saved for
later recall and analysis
|
| Cursor
measurements - All Recorder Modes |
Source:
Input A, B or DMM input
Dual vertical lines: Min-Max or Average voltage. Time
between cursors.
Single vertical line: Min-Max or Average voltage.
Absolute date and time or time from start.
|
| General
Specifications |
| Case |
Design:
Rugged, shock proof with integrated
protective holster
Drip and dust proof: IP51 according to IEC529
Shock and vibration: Shock 30g, Vibration 3g
according to MIL-T28800E, Type III, Class 3, Style B |
| Display |
Bright
LCD with CCFL backlight, 35/60 cd/m2 without/with power
adapter.
Size: 105 x 79 mm (4.1 x 3.1 inches)
Resolution: 240 x 240 pixels
Contrast and brightness: User adjustable,
temperature compensated |
| Memory
Save and Recall |
Scope
memories: 10 memory locations that each can contain two
waveforms plus corresponding setup.
Recorder memories: 2 memory locations that each can
contain 100 captured dual input scope screens, or a dual input
ScopeRecord (27,500 Min-Max pairs per input), or a dual input
Trendplot (13,500 Min-Max pairs per input). |
| Real-time
Clock |
Time
and date stamp for ScopeRecord, 100 captured screens and
Trendplots. |
| Power |
Line
power: Country specific line voltage adapter/battery
charger included
Battery power: Rechargeable NiMH (installed)
Battery operating time: 4 hours
Battery charging time: 4 hours
Battery power saving functions: Auto power down with
adjustable power down time. On screen battery power indicator |
| Mechanical
data |
Size:
256 x 169 x 64 mm (10.1 x 6.6 x 2.5 inches)
Weight: 1.95 kg (4.3 lbs) |
| Safety |
Compliance:
EN61010-1 (1993) Pollution degree 2,
UL 3111-1 (1994), CAN/CSA C22.2 No.1010.1 (1992), ANSI/ISA
S82.01 (1994) |
| Input
voltage ratings |
Maximum
probe voltage: 1,000V CAT II, 600V CAT III
(Maximum voltage between 10:1 probe tip (VP190) and reference
lead)
Floating voltage: 1,000V CAT II, 600V CAT III
(Maximum voltage between earth ground and any terminal (signal
input or shielding))
Independently isolated: 1,000V CAT II, 600V CAT III
inputs (Maximum voltage between any terminal of
one input or probe (VP190) and any other terminal
of another input or probe (VP190))
Maximum voltage on BNC input directly
(input A or B): 300V CAT III
Maximum voltage on meter input: 1,000V CAT II, 600V CAT
III |
| Environmental |
Operating
temperature: 0 ℃ to +50 ℃
Storage
temperature: -20 ℃
to +60 ℃
Humidity
10 ℃ to 30 ℃:
95% RH non condensing
30 ℃ to 40 ℃:
75% RH non condensing
40 ℃ to 50 ℃:
45% RH non condensing
Maximum operating altitude: 3,000 m (10,000 feet)
Maximum storage altitude: 12 km (40,000 feet)
Electro-Magnetic Compatibility: EN 61326-1 for emission
and immunity
|
| Optically
isolated PC/Printer interface |
To
printer: Supports HP Laserjet/sup>,Deskjet/sup>,Epson
FX/LQ/sup> and postscript printers via optional PAC 91
To PC: Transfer
instrument settings, screen images and waveform data,
compatible with Fluke View/sup>software for
Windows?/sup> via optional PM9080.
|
| Warranty |
3
years |
|
|
|
|
|
|
|
|
| 홈페이지 |
: |
http://daihanscience.koreasme.com |
| 회사명 |
: |
http://www.daihan.net 대한과학연구기자재 |
| 전화번호 |
: |
(1)02-967-5978 비상연락 (H.P) : 011-768-8228
(2)02-3673-0199
|
| 팩스번호 |
: |
(1)02-967-5979
(2)02-3673-0271
|
| 주소 |
: |
(1)서울특별시 성북구 상월곡동 24-4 대한빌딩서울 (우편번호: 110-123)
(2)서울 종로구 인의동 웅진빌딩 별관 210호 (우편번호: 110-785)
(3)■ 택배/화물서비스 : 당사에서는 100,000원 이상 구매 고객 분 에게는 당사에서 부담합니다 ( 택배 : KGB, 삼성, 화물 : 양양,대신,호남) ........................... 주거래은행 : ■ 예 금 주 : 김 민 옥■ 우리은행 : 048 - 401225 - 13 - 001 ■ 기업은행 : 086 - 023287 - 03 - 019 ■ 국민은행 : 045 - 24 - 0267 - 056
|
| URL |
: |
(1)http://www.daihan.net
(2)http://대한과학.net
|
| E-mail |
: |
daihansci@yahoo.co.kr |
|
|
|
